Search For A Product


Aerospace Lubricants


Authorized Dealer

HSR Carries All O.E.M Yamaha FJ1100/1200 Engine Parts

DYNO-mite Dynamometer

Email Hank

The HSR billet oil filtration system, simply put, it has no equal. more oil pressure, closed loop system, all oil filtered and cooled before being returned to your engine  Steel-splined Shifter HSR has billet parts for your engine Billet oil galley return, billet oil fill cap, billet oil fill spout breather Billet oil galley plugs, 1/8 pipe, 1/4 pipe for cooler to top oiler, and billet galley replacement. Billet oil pan block offs, and billet AN-8 oil line fittings GEAR LUBE PUMP $ 115.00 Make changing your gears quick and easy with the 1 gallon capacity gear oil tank. Hand pump allows for a quick, clean fill. Strong aluminum design is powder coated for durable wear.

Hank Scott Racing Products 

  • Billet Cams for the FJ & XJR guaranteed not to break under normal race conditions, stock profiles & race profiles in stock.
  • Drop Sump Oil Pan Conversion Kit, aids in oil pressure and helps eliminate oil starvation of oil pump.
  • Windage Tray & Oil Baffle Kit for all oil pans stock as well as drop sump. Helps maintain oil level around screen.
  • HSR Stage III Ultimate Remote Filter System, All CNC machined from billet, simply put; it leaves all others behind. Boost oil pressure and oil volume. A must for the serious Baby Grand Stock Car racer .
  • Billet Oil Fill Spout Breathers with or without inline oil baffle separator. Fine & course thread.

We carry all your needed for the FJ & XJR. We welcome all engine builders inquires for parts and supplies. Full in house machine shop service and building facilities. Our FJ & XJR engine components tested and proven winners in Baby Grands, Legends, Kenyon cars and Outlaw Mini-Sprints

 

Our Famous 3 port oil system just got better. Click Here for more information!   

Steel-splined Shifter
HSR has billet parts for your engine
 
Billet oil galley return, billet oil fill cap, billet oil fill spout breather
Billet oil galley plugs, 1/8 pipe, 1/4 pipe for cooler to top oiler, and billet galley replacement.
Billet oil pan block offs, and billet AN-8 oil line fittings
GEAR LUBE PUMP        $ 115.00
 

Make changing your gears quick and easy with the 1 gallon capacity gear oil tank. Hand pump allows for a quick, clean fill. Strong aluminum design is powder coated for durable wear.

Air Charger Air Filter Kit

The HSR Air Charger filter kit consists of a K&N oval air filter element, front and rear element housings, rubber car grommets, hardware and outerwear pre-filter. Specifiy color: Red, Black, Blue, Orange, Pink, Purple.

HSR-10010 Air Charger Filter Kit
HSR-10012 Replacement Air Filter Element
HSR-10013 Replacement Front Plates
HSR-10014 Replacement Rubber Carb Grommets
HSR-10017 Outerwear Pre-Filter - Specify Color
HSR-10020 K&N Vent Crankcase Filter

Back To Top

Heat Shield Air Deflector

The Heat Shield Air Deflector mounts between the cylinder head and the carbs to reduce the effects of engine heat. The Air Deflector flap guides air flow past the rear of the cylinder and head for better cooling and ignition coil mounting holes are provided along the top edge for convenient coil mounting.

HSR-10025 Heat Shield Air Deflector

Back To Top

Quick Change Float Bowl & Legend Carb Jet Kit

The carburetor float bowls are modified to accept removable drain plugs allowing for quick main jet changes. modification requires your float bowls in exchange. Carb jet kit is used to fine tune performance with Legned engine modifications. Includes main jets, pilot jets, and needle shims. All jets are also sold individually.

HSR-10030 Quick change Float Bowl Kit
HSR-10031 Replacement Drain Plug
HSR-10032 Replacement Drain Plug O-ring
HSR-10050 Carb Jet Kit

Back To Top

Top-End Oiling Kit

Top End Oiling Kit privdes non-restricted oil flow to the cylinder head. Increases oil pressure and oil flow for better cylinder head cooling. Installation requires machining to the cylinder head.

HSR-10100 Top End Oiling Kit
HSR-10105 1/8" Pipe to #4 Straight Fitting
HSR-10106 Replacement Oil Galley Adapter
HSR-10107 Replacement #4 Line Kit, each

Back To Top

Oil Coolers

Oil Coolers prtorect against extreme engine overheating. Coolers are available in many different styles to fit any mounting configuration and use a #8 line fitting.

HSR-10205 Derale Oil Cooler With Fan
HSR-10210 Setrab 619 Oil Cooler (dual pass)
HSR-10215 Setrab 625 Oil Cooler
HSR-10220 Fluidyne Aluminum Oil Cooler

Back To Top

Stage II Remote Oil Filter System

The HSR Stage II Remote Oil System increases oil volume and flow privding improved oil pressure and cleaning.

HSR-10300 Complete Stage II System
HSR-10301 Remote Adapter (Engine)
HSR-10302 Remote adapter O-ring
HSR-10303 Remote Mount (Filter)
HSR-10304 #8x20mm Filter Adapter
HSR-10305 Oil Filter
HSR-10306 Remote Mounting Plate
HSR-10307 Base O-ring
HSR-10308 In line O-ring
HSR-10309 Steel Fitting - 1/2" pipe to #8 line
HSR-10310 #8 Hose - 9-foot length
HSR-10311 #8 Straight Hose End (2 used)
HSR-10312 #8-45 degree Hose End (2 used)
HSR-10313 #8 90 degree Hose End (3 used)
HSR-10314 #8 120 degree Hose End
HSR 10315 1/8" pipe drain plug
HSR 10316 8/10 Modified Fitting (3 used)
HSR-10317 Mounting Hardware Kit

Back To Top

Billet Oil Pan Fittings

Billet Oil Pan Fittings allow connection of oil lines to the pan and engine oil passages

HSR-10401 Billet Oil Pan Adapter to #8 hose end
HSR-10402 Billet Oil Pan Block-Off Cover
HSR-10403 Magnetic Oil Pan Drain Plug
HSR-10404 Billet Oil Pressure Passage Adapter

Back To Top

Wiseco Pistons

WIS-R1195 Piston Kit - 1195 CC (77.25). 10:1 C.R.
WIS-E1202 Piston Kit 1202cc (77.50mm), 10:1 C.R.
WIS-R1203 Piston Kit 1202CC (77.55mm), 10:1 C.R

Back To Top

Ross Pistons

Ross Forged big bore
pistons, 1250 , 1314, 1349, kits available. 12.1 compression.

Back To Top

Replacement Cylinder Sleeves

Heavy Duty replacement cylinder sleeves are manufactured with a high nickel content to maintain true bore shapes. Made to exact specifications and precision ground for durable and long lasting performance.

HSR-20300 Replacement Cylinder Sleeves

Back To Top

Clutch Pressure Plate Conversion Kit & Racing Clutch Plates

The clutch pressure plate conversion kit adds increased clutch spring pressure and strength. Your stock pressure plate is required in exchange. Barnett Racing Clutch plates provide added engagement friction for extreme road course use.

HSR-40500 Pressure Plate Conversion Kit

HSR-40550 Barnett Cluth Friction Plates

Back To Top

Billet Clutch Basket

The stock clutch basket can break apart due to increased loads. the billet clutch basket modification can reduce the risk of failure. Modification includes billet clutch aluminum clutch housing, heavy duty backing springs, heavy dute backing plate and rivets. This unit is assembled and rivets are welded. Your stock clutch basket is required in exchange.

HSR-40560 Billet Clutch Basket Modification

Back To Top

Racing Valve Spring Set

High RPM Yamaha engines require the added valve control provided by HSR Racing Valve Springs. Springs are made of chrome silicon material, precision wound and tested for accurate operating spring pressure rates. Springs are used with stock retainers and keepers and include .030" thick spring base shims

HSR50100 Racing Valve Spring Set With Shims
HSR50110 Spring Base Shims .010"
HSR50120 Spring Base Shims .020"
HSR50130 Spring Base Shims .030

Back To Top

High Performance Valve Guides

High performance nickel bronze valve guides resist valve stem galling and reduce the chance of breakage caused by high engine operating RPM and temperatures. Used OEM valve stem seals. Sold individually

HSR-50200 Intake/Exhaust Valve Guide, Standard O.D.
HSR-50210 Intake/Exhaust Valve Guide, Oversize +.002"
HSR-50220 Intake/Exhaust Valve Guide, Oversize +.003"

Back To Top

See Picture Above

Adjustable Cam Sprockets

Adjustable cam sprockets allow the tuner to accurately degree the camshafts for precise cam timing and optimum perofrmance. The stock mounting holes are slotted six degrees each way from stock. This modification is done to stock sprockets and requires your stock sprockets in exchange.

HSR-50300 Adjustable Cam Sprockets - Set of two

Back To Top

Valve Shim Adjustment Kit

Complete shim adjustment kit includes an assortment of valve adjustment shims, magnetic shim removal tool, cam follower depression too all packaged in a compact, easy-view case. Please specify initial shim size range.

HSR-50500 Complete Valve Adjustment Kit

HSR-50510 Cam Follower Depression Tool

Back To Top